Another Valenica ?

[fuseable]

Does the compression driver extend into the round hole in the back of the enclosure? And is the horn and driver installed from the back of the housing, or from the front? The drawings on the Lansing site leave are not very clear.

[endeeinn]

The ones that use the 806A driver do (I can't speak for any later 902A drivers if any). The hole is covered at the rear of the enclosure by a piece of 1/4" or 3/16" plywood which I remove and replace with a larger piece of 3/4" particle board for rigidity in addition to other bracing within the enclosure.

[Mustang Marvin]

There is clearance between the 806 compression driver and the rear wall of my 846B Valencias. The horn (811) mounts from the front. The 846A Valencias may be different.